[USRP-users] LFRX/LFTX daughterboard combination.
Marcus D. Leech
patchvonbraun at gmail.com
Tue Jul 21 15:17:11 EDT 2020
On 07/21/2020 03:15 PM, Stephen Spears via USRP-users wrote:
> Hi there,
> I have a question about using the LFRX and LFTX daughterboards
> together. I tried contacting Ettus through their website, but received
> no response, so I thought I might find answers here instead. I need to
> do both RX and TX at low frequencies (<30 MHz), but according to the
> Ettus website, there is no combined TX/RX daughterboard for this range.
> I am wondering if I need separate N200s for each board, or if there is
> a way to fit both in a single N200. I ask this because the boards LFRX
> and LFTX boards look significantly smaller on the website
> than the combined RX/TX boards. If any of you have experience using
> these boards, please let me know whether using a single N200 is possible.
> Stephen Spears
> USRP-users mailing list
> USRP-users at lists.ettus.com
The N200 will support a single card *IN EACH DIRECTION*. So, there's no
problem having both a LFRX and LFTX in a single N200 or N210.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users