[USRP-users] 1 Ts delay in USRP B210

Marcus D. Leech patchvonbraun at gmail.com
Tue Jul 21 12:26:18 EDT 2020


On 07/21/2020 12:25 PM, Prasad wrote:
>
> We are using internal clock, don’t use any GPSDO or external clock.
>
> So for internal clock is this expected?
>
> Thanks,
>
The internal clock is specced to +/- 2PPM.   You're seeing much less 
than that, so it's within spec.


> *From:*USRP-users [mailto:usrp-users-bounces at lists.ettus.com] *On 
> Behalf Of *Marcus D. Leech via USRP-users
> *Sent:* Tuesday, July 21, 2020 9:49 PM
> *To:* usrp-users at lists.ettus.com
> *Subject:* Re: [USRP-users] 1 Ts delay in USRP B210
>
> On 07/21/2020 12:13 PM, Prasad via USRP-users wrote:
>
>     Soft reminder!
>
>     Thanks,
>
>     *From:*Prasad [mailto:kpras at trilcomm.com]
>     *Sent:* Monday, July 20, 2020 7:58 PM
>     *To:* 'usrp-users at lists.ettus.com <mailto:usrp-users at lists.ettus.com>'
>     *Cc:* 'Rao Yenamandra'
>     *Subject:* 1 Ts delay in USRP B210
>
>     Dear Team.
>
>     Hope you are doing well and safe.
>
>     We are bringing up our NR-5G UE stack with USRP B210.
>
>     If time permits, would you pls. reply to below concern with your
>     valuable information.
>
>     During the synchronization procedure, we observe atleast /±/1
>     /Ts/ (Sampling Time) drift in rx streamer in every  ~40ms time period.
>
>     Are we missing any time_spec during /uhd_rx_streamer_recv/ api or
>     in /uhd_tx_streamer_send/ ?
>
>     Master clock rate: 30.72e6
>
>     Sampling rate: 30.72e6
>
>     Carrier frequency: 3.8e9
>
>     We use one B210 to transmit time domain samples back to back and
>     others to receive.
>
>     Log snippet:
>
>     Init PSS detected with lag: /4469/ (/PSS detection offset from the
>     slot boundary/ )
>
>     sss has been detected
>
>     Init PSS detected with lag: 4469
>
>     sss has been detected
>
>     Init PSS detected with lag: 4469
>
>     sss has been detected
>
>     Init PSS detected with lag: 4469
>
>     sss has been detected
>
>     Init PSS detected with lag: 4470 à1 Ts drift
>
>     sss has been detected
>
>     Init PSS detected with lag: 4470
>
>     sss has been detected
>
>     Init PSS detected with lag: 4470
>
>     sss has been detected
>
>     Init PSS detected with lag: 4471 à1 Ts drift.
>
>     sss has been detected
>
>     Init PSS detected with lag: 4472à1 Ts drift
>
>     sss has been detected
>
>     Init PSS detected with lag: 4472
>
>     sss has been detected
>
>     Init PSS detected with lag: 4472
>
>     sss has been detected
>
>     Init PSS detected with lag: 4484 à12 Ts drift
>
>     sss has been detected
>
>     Thanks! in advance.
>
>     Regards,
>
>     Prasad.
>
> Are you just using the on-board reference clock, or using something 
> like a GPS module?
>
> The drift you show is roughly 0.8PPM (if I've done my math correctly), 
> which is well within spec for this board without a better reference clock.
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20200721/a5c1aa7e/attachment.html>


More information about the USRP-users mailing list