[USRP-users] error at updating the filesystem for usrp n310

Pavlos Basaras pbasaras at gmail.com
Wed Jul 15 10:02:41 EDT 2020


Hello,

thank you very much for your prompt reply.

i copied the .mender file by using the "scp" command.
Yes, i am running the command on the USRP.

I am not sure if this is a problem but --initially when i created the
.mender file, the host was running the UHD 3.14.0.0 and the USRP had
3.14.1.0. This is when the problem appeared first.
Then i changed the uhd to 3.14.1.0 on the host to match exactly the UHD on
the usrp, but the error still persists (or course i deleted the old file
from the usrp).

any ideas?

best,
P.


On Wed, Jul 15, 2020 at 4:53 PM Marcus D. Leech via USRP-users <
usrp-users at lists.ettus.com> wrote:

> On 07/15/2020 08:12 AM, Pavlos Basaras via USRP-users wrote:
> > Dear community,
> >
> > i am using the usrp n310 device. I am following the start up guide
> > from
> >
> https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Setting_up_a_Serial_Console_Connection
> > for the initial setup of the usrp.
> >
> > I completed the installation instructions for the host from
> >
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_(UHD_and_GNU_Radio)_on_Linux
> > <
> https://kb.ettus.com/Building_and_Installing_the_USRP_Open-Source_Toolchain_%28UHD_and_GNU_Radio%29_on_Linux
> >
> > everything seemed ok.
> >
> > I can connect to the device through both ssh and by the serial port.
> >
> > I am trying to use mender to update the filesystem at the usrp device.
> >
> > I executed the command: sudo uhd_images_downloader -t mender -t n3xx
> --yes
> > at the host  to obtain usrp_n3xx_fs.mender, which i then copied to the
> > usrp.
> >
> > At the usrp i am using the command: mender -rootfs
> > /home/root/usrp_n3xx_fs.mender
> > to start the update of the system but i have the following
> > incompatibility issue :
> >
> > ERRO[0000] Installation failed: installer: failed to read and install
> > update: installer: image (device types [ni-sulfur-rev6-mender
> > ni-sulfur-rev5-mender ni-sulfur-rev4-mender ni-sulfur-rev3-mender
> > ni-sulfur-rev6 ni-sulfur-rev5 ni-sulfur-rev4 ni-sulfur-rev3]) not
> > compatible with device ni-sulfur-rev11-mender  module=rootfs
> > ERRO[0000] installer: failed to read and install update: installer:
> > image (device types [ni-sulfur-rev6-mender ni-sulfur-rev5-mender
> > ni-sulfur-rev4-mender ni-sulfur-rev3-mender ni-sulfur-rev6
> > ni-sulfur-rev5 ni-sulfur-rev4 ni-sulfur-rev3]) not compatible with
> > device ni-sulfur-rev11-mender  module=main
> >
> >
> > How can i resolve this?
> >
> >
> > Details on the UHD intalled on both the host and the usrp device"
> >
> > HOST computer uhd: [INFO] [UHD] linux; GNU C++ version 5.4.0 20160609;
> > Boost_105800; UHD_3.14.1.HEAD-0-g0347a6d8
> > USRP uhd:   [INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106600;
> > UHD_3.14.1.1-0-g0347a6d8
> >
> >
> > all the best,
> > Pavlos.
> >
> This seems a bit odd.
>
> Two things:
>
> (A)  How did you copy the .mender file over to the usrp?
> (B) (This seems really dumb, and I apologize in advance) are you sure
> that you're running the mender command ON the USRP?
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20200715/dece1ab9/attachment.html>


More information about the USRP-users mailing list