[USRP-users] USRP X310
k5so at k5so.com
Tue Jul 14 10:31:43 EDT 2020
Yes. Thanks. As I said.
> On Jul 14, 2020, at 8:29 AM, Marcus D Leech <patchvonbraun at gmail.com> wrote:
> The input levels that cause distortion vary quite a bit from daughtercard to daughtercard, and even within a daughtercard there will be variability depending on frequency.
> The performance data can be consulted for this:
> https://files.ettus.com/performance_data/ <https://files.ettus.com/performance_data/>
> What you’re looking for is IP3 and P1dB data.
> But “damage limits” are given
> Sent from my iPhone
>> On Jul 14, 2020, at 10:17 AM, Joe Martin <k5so at k5so.com> wrote:
>> Marcus L.’s response has some definitive info in the links. For example, in the TwinRX link it is stated:
>>> Never apply more than +10 dBm of power into any RF input.
>> So there you have it. Thanks for the details Marcus.
>>> On Jul 14, 2020, at 7:55 AM, Marcus D. Leech via USRP-users <usrp-users at lists.ettus.com <mailto:usrp-users at lists.ettus.com>> wrote:
>>> On 07/14/2020 05:53 AM, Marcus Müller via USRP-users wrote:
>>>> Hi Arash,
>>>> The input power is not defined by the motherboard (X310) you're using,
>>>> but by the analog frontend daughterboard (like TwinRX, UBX-160, SBX,…)
>>>> you've plugged in to these.
>>> For example, see the "Care and Handling" for the SBX here:
>>> https://kb.ettus.com/SBX_Getting_Started_Guides#Proper_Care_and_Handling <https://kb.ettus.com/SBX_Getting_Started_Guides#Proper_Care_and_Handling>
>>> And for the TwinRx
>>> USRP-users mailing list
>>> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users