[USRP-users] Newbie question on N200 and gnuradio companion

Marcus D Leech patchvonbraun at gmail.com
Sun Jul 5 12:13:36 EDT 2020


This should be possible with the Basic_tx board. 

Sent from my iPhone

> On Jul 5, 2020, at 1:06 AM, Anthony Holland via USRP-users <usrp-users at lists.ettus.com> wrote:
> 
>  Hello Ettus N200 /gnuradio companion gurus!
> 
> A ‘newbie’ question……
> 
> I have a gnuradio-companion set of blocks that
> Produce a custom designed complex periodic waveform
> Using the voltage controlled oscillator block in grc.
> It outputs a complex periodic waveform at 100kHz.
> If I purchase an Ettus N200 with the appropriate daughter boards
> (That go down below 1mhz) can I just send the output of
> My eco block in grc direct into a UHD RSPN sink to
> Have the signal come out in analog format from the N200?
> 
> I’m hesitant to spend the money on the N200 if it’s not going to work.
> 
> Thanks for any tips/pointers!  (Maybe a working grc example that works
> With N200?)
> 
> Anthony
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com



More information about the USRP-users mailing list