[USRP-users] RFNOC_OOT_SRCS cleared in top/n3xx/Makefile.srcs

EJ Kreinar ejkreinar at gmail.com
Thu Jan 30 16:23:52 EST 2020


Ah -- It's fairly common for the "OOT.inc" builds to break between releases
or when new devices are added, so I usually send in the PRs to clean it up.

In this case, I havent tried 3.15 yet, so I wouldnt have found any issues
with the OOT builds yet.

EJ

On Thu, Jan 30, 2020 at 4:03 PM Rob Kossler <rkossler at nd.edu> wrote:

> EJ,
> I don't quite understand your comments. I'm talking about Ettus code in
> the 3.15 release.
> Rob
>
> On Thu, Jan 30, 2020 at 3:57 PM EJ Kreinar <ejkreinar at gmail.com> wrote:
>
>> Whoa there,
>>
>> I havent updated any of my code to UHD-3.15 yet so you're a bit ahead of
>> me! I usually make the relevant PRs if/when OOT build process breaks -- so
>> I'd recommend sending over the relevant PR to fpga repo? Will probably help
>> me a few months down the line :P
>>
>> Thanks!
>> EJ
>>
>> On Wed, Jan 29, 2020 at 5:28 PM Andrew Payne via USRP-users <
>> usrp-users at lists.ettus.com> wrote:
>>
>>> I had the same issues! I just ended up putting my verilog file paths in
>>> Makefile.n3xx.inc and it works. This might need to be fixed unless I did
>>> something wrong.
>>>
>>> On Wed, Jan 29, 2020 at 16:18 Rob Kossler via USRP-users <
>>> usrp-users at lists.ettus.com> wrote:
>>>
>>>> I have been struggling all day with why I can't build my OOT rfnoc
>>>> blocks for the N310 using v3.15.0.0.  It appears that the problem is that
>>>> there is a file top/n3xx/Makefile.srcs that is clearing the RFNOC_OOT_SRCS
>>>> variable after it is set in the users OOT makefile. I just commented the
>>>> line in top/n3xx/Makefile.srcs and that seems to do the trick.  Is this a
>>>> known issue?
>>>>
>>>>
>>>> # Makefile.n3xx.inc
>>>> ...
>>>> include $(BASE_DIR)/n3xx/Makefile.OOT.inc
>>>> include $(BASE_DIR)/n3xx/Makefile.srcs
>>>> ...
>>>>
>>>> # Makefile.srcs
>>>> RFNOC_OOT_SRCS = \
>>>> _______________________________________________
>>>> USRP-users mailing list
>>>> USRP-users at lists.ettus.com
>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>>
>>> _______________________________________________
>>> USRP-users mailing list
>>> USRP-users at lists.ettus.com
>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20200130/9e861380/attachment.html>


More information about the USRP-users mailing list