[USRP-users] Regarding N321 shutdown

Sam Reiter sam.reiter at ettus.com
Fri Jan 10 10:50:29 EST 2020


Milind,

You should run that command when you're ssh'ed into the device or have a
serial session open. That command won't affect the N321 if it is simply run
from a host terminal (I'd imagine it will just shut down your host).

Connecting via SSH:
https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Connecting_to_the_ARM_via_SSH

Setting up a Serial Console Connection:
https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide#Setting_up_a_Serial_Console_Connection

-Sam

On Fri, Jan 10, 2020 at 6:30 AM MILIND KUMAR VADDIRAJU via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi,
>
> I'm new to the world of SDR and have just been handed a USRP N321. The
> guide here
> <https://kb.ettus.com/USRP_N300/N310/N320/N321_Getting_Started_Guide>
> strongly recommends shutting the system down correctly instead of using a
> long press of the power button. However the command
>
> shutdown ­-h now
>
> in the terminal of a host computer connected to the USRP via an ethernet cable fails. Could
> someone please let me know what the appropriate method to shut the USRP down is?
>
> Cheers,
>
> Milind
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20200110/a08f35c8/attachment.html>


More information about the USRP-users mailing list