[USRP-users] E310 Usable Bandwith

Marcus D. Leech patchvonbraun at gmail.com
Fri Nov 22 13:55:55 EST 2019


On 11/22/2019 12:09 PM, Jeremy Brauer via USRP-users wrote:
> Hey,
>
> according to the specifications of the E310, the RF hardware is capable
> of processing up to 56 MHz of bandwidth, but the ARM processor only
> supports 10MS/s.
> Since signal processing written in GnuRadio, C/C++ or Python will be
> executed on the ARM processor, I assume those programms will also have
> the limitations of 10MS/s and the availiable bandwith will be limited to
> 10MHz.
> Is this assumption correct?
>
> Is it neccessary to perform the signal processing directly on the FPGA
> by writing VHDL code to obtain higher bandwith and data rates?
>
> Best regards
> Jeremy
>
>
Yes, that is correct.





More information about the USRP-users mailing list