[USRP-users] E310 Usable Bandwith

Jeremy Brauer jeremy.brauer at rub.de
Fri Nov 22 12:09:23 EST 2019


Hey,

according to the specifications of the E310, the RF hardware is capable
of processing up to 56 MHz of bandwidth, but the ARM processor only
supports 10MS/s.
Since signal processing written in GnuRadio, C/C++ or Python will be
executed on the ARM processor, I assume those programms will also have
the limitations of 10MS/s and the availiable bandwith will be limited to
10MHz.
Is this assumption correct?

Is it neccessary to perform the signal processing directly on the FPGA
by writing VHDL code to obtain higher bandwith and data rates?

Best regards
Jeremy




More information about the USRP-users mailing list