[USRP-users] X310 unable to connect after recovery procedure

Marcus D. Leech patchvonbraun at gmail.com
Thu Mar 28 13:33:30 EDT 2019


On 03/28/2019 07:26 AM, Nicolas GALLAND wrote:
> Hi,
>
> I used the file named usrp_x310_fpga_HG.bit
>
> Nicolas
Could you show me an ifconfig for the interface that you're using for 
the device?


>
>
> Le 27/03/2019 à 15:10, Marcus D. Leech a écrit :
>> On 03/27/2019 05:39 AM, Nicolas GALLAND wrote:
>>> Hi,
>>>
>>> after the recovery, i can't ping the device to the default address. 
>>> It gives me a "host unreachable" error when I try.
>>>
>>> Nicolas
>> Which image did you select when you used Vivado to recover the device 
>> via JTAG?
>>
>>
>>>
>>> Le 26/03/2019 à 17:28, Marcus D Leech a écrit :
>>>> So it’s not clear where we are at here.
>>>>
>>>> After recovery can you ping the device at the default address?
>>>>
>>>>
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Mar 25, 2019, at 12:12 PM, Joe Martin via USRP-users 
>>>>> <usrp-users at lists.ettus.com> wrote:
>>>>>
>>>>> Thanks, Nicolas.  I am interested to hear how you eventually clear 
>>>>> the problem as I also have an X310 and so far all works fine but 
>>>>> someday I may face the same issue as you are experiencing so 
>>>>> please when you find a solution please post it.  I am not 
>>>>> experienced enough yet with mine to be able to suggest a solution 
>>>>> for you unfortunately. Maybe someone else can.
>>>>>
>>>>> I (like you) am eager to hear any suggestion(s) to resolve your 
>>>>> issue.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Joe
>>>>>
>>>>>> On Mar 25, 2019, at 9:28 AM, Nicolas GALLAND 
>>>>>> <nicolas.galland at obspm.fr> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> it is indeed a typo here. I did ping 192.168.10.2 first, and then 
>>>>>> I tried on 192.168.10.3 to see if the error message was the same. 
>>>>>> In any case (even using ping broadcast on all the sub network my 
>>>>>> computer is connected to) i have this message. It looks like 
>>>>>> there is a connection between the computer and the device, since 
>>>>>> my computer says there is no more network when I switch off the 
>>>>>> USRP.
>>>>>>
>>>>>> Kind regards
>>>>>>
>>>>>> Nicolas
>>>>>>> Le 22/03/2019 à 18:52, Joe Martin a écrit :
>>>>>>> Nicolas,
>>>>>>>
>>>>>>> It appears you were pinging 192.168.10.3, not 192.168.10.2.  
>>>>>>> Maybe this particular example was simply a typo and you used the 
>>>>>>> correct IP address to ping during your other tests?
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>> Joe
>>>>>>>
>>>>>>>> On Mar 22, 2019, at 11:05 AM, Nicolas GALLAND via USRP-users 
>>>>>>>> <usrp-users at lists.ettus.com> wrote:
>>>>>>>>
>>>>>>>> Hello everyone,
>>>>>>>>
>>>>>>>> I had some trouble with my X310 and I needed to upload my UHD 
>>>>>>>> installation and consequently to update the FPGA image on the 
>>>>>>>> board. After doing it through eternet port, I lost connection 
>>>>>>>> so I decide to follow the recovery procedure to upload the FPGA 
>>>>>>>> image using the JTAG port (following 
>>>>>>>> https://kb.ettus.com/X300/X310_Device_Recovery).
>>>>>>>>
>>>>>>>> The upload is fine, and the computer recognises the network 
>>>>>>>> with IP address 192.168.10.1, but when I try to ping 
>>>>>>>> 192.168.10.2 (as explained in the procedure) I have
>>>>>>>>
>>>>>>>> PING 192.168.10.3 (192.168.10.3) 56(84) bytes of data.
>>>>>>>>  From 192.168.10.1 icmp_seq=1 Destination Host Unreachable
>>>>>>>>  From 192.168.10.1 icmp_seq=2 Destination Host Unreachable
>>>>>>>>  From 192.168.10.1 icmp_seq=3 Destination Host Unreachable
>>>>>>>>  From 192.168.10.1 icmp_seq=4 Destination Host Unreachable
>>>>>>>>  From 192.168.10.1 icmp_seq=5 Destination Host Unreachable
>>>>>>>>
>>>>>>>> until I stop it. I have two x310 in the same situation, and I 
>>>>>>>> tried on two different computers with different ethernet cables.
>>>>>>>>
>>>>>>>> Could the hardware be broken ? (If so, isn't it strange that 
>>>>>>>> the computer still sees the network ?)
>>>>>>>>
>>>>>>>> Thanks a lot, and nice week end !
>>>>>>>>
>>>>>>>> Kind regards,
>>>>>>>>
>>>>>>>>     Nicolas
>>>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> USRP-users mailing list
>>>>> USRP-users at lists.ettus.com
>>>>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>




More information about the USRP-users mailing list