[USRP-users] RFNoC questions - standalone system, docs

Nick Foster bistromath at gmail.com
Mon Mar 25 12:35:43 EDT 2019


I wrote a blog post a while back describing a RX->TX RFNoC loopback
application. It should still apply to the latest UHD:

https://corvid.io/2017/04/22/stupid-rfnoc-tricks-loopback/

Nick

On Sun, Mar 24, 2019 at 5:33 PM Julius Baxter via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi all,
>
> I have a couple of quick questions.
>
> I have an N310 and intend to build a system which doesn't involve passing
> the stream through a host - ie. I want to add a CE or two which will handle
> Rx and generate samples for Tx. Has anyone done this, are there any
> pointers? I presume the host will still be involved to configure the blocks
> (radio, ddc, duc, etc.). Can I still use the Python USRP API to do this
> config?
>
> Is there anything complementing the Ettus KB on the RFNoC internals? I've
> seen some posts referencing what parameters on various blocks do, and other
> nuggets of knowledge regarding building CEs for RFNoC. Is there a
> centralised place for details on how RFNoC works, or is reading the RTL and
> this ml the best source of info?
>
> Thanks,
> Jules
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20190326/a660c10c/attachment.html>


More information about the USRP-users mailing list