[USRP-users] x310 brick no ethernet link after fpga burn - urgent

Xavier Arteaga xavier.arteaga at softwareradiosystems.com
Fri Mar 15 08:04:49 EDT 2019


Hi,
Same happened to me once before. You need to follow this:
https://kb.ettus.com/X300/X310_Device_Recovery

Good luck.

Regards,
Xavier

On Fri, 15 Mar 2019 at 12:57, Ilay Nissim via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi
>
> I am using x310 and after upgrading 13.01 to 13.3.1
>
> I have an urgent issue
>
> My FPGA  burn was stoppend in the beginning and now it seems there is a
> brick
>
> No eth connection on either port
>
> Is there a golden image for the FPGA?
>
> And advice?
>
> Regards
>
>
>
> Regards,
> Ilay Nissim
> RT Embedded Team Leader
>
> Netline Communications Technologies Ltd
> Tel: + (972) 36068171 <+972%203-606-8161>
> Fax: + (972) 36068101 <+972%203-606-8101>
> http://www.netlinetech.com/
> Azrieli Circular Tower , Menachem Begin 132, Tel-Aviv 67021, ISRAEL
>
>
>
> This email and the associated attachments may contain information that is
> proprietary, privileged, confidential or otherwise protected from
> disclosure. If you are not the intended recipient or otherwise have
> received this message in error, you are not authorized to read, print,
> retain, copy or disseminate this message or any part of it. If you are not
> the intended recipient or otherwise have received this message in error,
> please notify me immediately, destroy any paper copies and delete all
> electronic files of the message.
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20190315/d4d9c62b/attachment.html>


More information about the USRP-users mailing list