[USRP-users] FLEX900 + USRP1 Rev2

Kyeong Su Shin ksshin at uw.edu
Mon Oct 23 16:07:50 EDT 2017

Hello Angilberto Muniz:

An alternative to this is to modify the USRP 1 motherboard (instead of the
dauthgerboard). There used to be a GNURadio wiki page about this
("USRPSerialBelow500"), but it is apparently gone. You can still find some
old e-mail archives and Chinese articles (with images) regarding this.

Kyeong Su Shin

On Mon, Oct 23, 2017 at 11:16 AM, Angilberto Muniz Sb via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi,
> I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine
> with USRP1 Rev4.5, but wont work with USRP1 Rev2.
> I read somewhere that I shoud modify the flex900 to make it work with
> USRP1 Rev2.
> The problem is I read two different tips...
> in "https://files.ettus.com/manual/page_dboards.html#dboards_rfxmod" it
> says:
> "...move R35 to R36 and move R117 to R115..."
> *in "**https://lists.gnu.org/archive/html/discuss-gnuradio/2009-04/msg00518.html
> <https://lists.gnu.org/archive/html/discuss-gnuradio/2009-04/msg00518.html>"
> it says:*
> *".. move R36 to R34 and move R115 to R116..."*
> *Any help?*
> Thank you,
> Angilberto.
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171023/389742c6/attachment-0002.html>

More information about the USRP-users mailing list