[USRP-users] FLEX900 + USRP1 Rev2
Marcus D. Leech
mleech at ripnet.com
Mon Oct 23 15:21:04 EDT 2017
On 10/23/2017 02:16 PM, Angilberto Muniz Sb via USRP-users wrote:
> I have a USRP1 Rev2 board and a FLEX900 dboard. The flex900 works fine
> with USRP1 Rev4.5, but wont work with USRP1 Rev2.
> I read somewhere that I shoud modify the flex900 to make it work with
> USRP1 Rev2.
> The problem is I read two different tips...
> in "https://files.ettus.com/manual/page_dboards.html#dboards_rfxmod"
> it says:
> "...move R35 to R36 and move R117 to R115..."
I'd try the above first.
But keep in mind that a "FlexXXX" board will be over a decade old (!!!)
at this point, and the USRP1 is EOL.
> it says:*
> *".. move R36 to R34 and move R115 to R116..."*
> *Any help?*
> Thank you,
> USRP-users mailing list
> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users