[USRP-users] second Gbps connection on single PC

Brent Stapleton brent.stapleton at ettus.com
Fri Oct 20 15:22:46 EDT 2017


Hi Oz,

You can change the IP address of the second X310 to whatever you'd like by
following these instructions
<https://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_setup_network>. If
I understand your setup correctly, each of the interfaces in the system
(host or X310, 4 in total) should have its own IP address, and you'll
probably want each host-X310 pair to be on the same subnet.

Regards,
Brent

On Fri, Oct 20, 2017 at 11:35 AM, Osvaldo Alcala (Ozzie) via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi,
>
>
>
> I have an 10 Gbps card on my work station (recommended by Nate) which has
> 2 lots. In 1 slot I have a X310 connected and its working fine with an ip
> address 192.168.40.2
>
>
>
> I want to use the second slot to connect the second X310, but just curios
> what ip address should I use? The gateway (pc 10 Gbps card) will be
> 192.168.40.1, so how do I deal with the second X310 as to not have any
> collisions?
>
>
>
> Thank you
>
>
>
> Oz
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171020/24046490/attachment-0002.html>


More information about the USRP-users mailing list