[USRP-users] UHD USRP device address specification

Marcus Müller marcus.mueller at ettus.com
Thu Oct 5 15:12:14 EDT 2017


Sure, just use

serial=xxxxxxx

as device address. You can find out the serial numbers of your USRPs with uhd_find_devices.

Note that the USRP is full duplex, so you don't even need two b200mini to simultaneously RX and TX.

Best regards,
Marcus

On 5 October 2017 8:59:35 PM GMT+02:00, Duixian Liu via USRP-users <usrp-users at lists.ettus.com> wrote:
>Hi,
>Can I use one laptop to control two UHD radios (B200MINI), where one is
>
>used as the Tx and another one as the Rx? The question is how to
>specify 
>the device addresses to the two radios? And where or how to find the 
>addresses? I am using GNU Radio Companion. I need to provide the Device
>
>Address  to the Tx Sink and the Rx Source. 
>Thanks.
>
>Duixian Liu

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171005/aa63fd3c/attachment-0002.html>


More information about the USRP-users mailing list