[USRP-users] UHD USRP device address specification

Nicolas Cuervo nicolas.cuervo at ettus.com
Thu Oct 5 15:09:50 EDT 2017


Duixian,

you can identify each device by its serial number, or by giving it a custom
name as stated in the manual [1]


Regards,
- Nicolas
[1] https://files.ettus.com/manual/page_identification.html#id_naming_set

On Thu, Oct 5, 2017 at 8:59 PM, Duixian Liu via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi,
> Can I use one laptop to control two UHD radios (B200MINI), where one is
> used as the Tx and another one as the Rx? The question is how to specify
> the device addresses to the two radios? And where or how to find the
> addresses? I am using GNU Radio Companion. I need to provide the Device
> Address  to the Tx Sink and the Rx Source.
> Thanks.
>
> Duixian Liu
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171005/2a876239/attachment-0002.html>


More information about the USRP-users mailing list