[USRP-users] ADC Self-Test FAILED

Mark Koenig mark.koenig at iubelttechnologies.com
Mon Oct 2 10:18:41 EDT 2017


All,


I am getting the following output when trying to recover the mb EEprom.  Can anyone be of assistance?

Thank you

Mark


[root at localhost utils]# ./usrp_burn_mb_eeprom --args="recover_mb_eeprom,addr=192.168.20.2" --values="revision=4"
linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16); Boost_105300; UHD_003.009.000-0-gcd88f80f

Creating USRP device from address: recover_mb_eeprom,addr=192.168.20.2
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...

UHD Warning:
    UHD is operating in EEPROM Recovery Mode which disables hardware version checks.
    Operating in this mode may cause hardware damage and unstable radio performance!
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Detecting internal GPSDO.... Found an internal GPSDO
-- Initialize Radio0 control...
-- Performing register loopback test... pass
-- Initialize Radio1 control...
-- Performing register loopback test... pass
Error: RuntimeError: ADC self-test failed! Ramp checker status: {ADC0_I=Bit Errors!, ADC0_Q=Good, ADC1_I=Good, ADC1_Q=Good}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171002/0d52676a/attachment-0002.html>


More information about the USRP-users mailing list