[USRP-users] Signal Processing Block with Control Port

Marcus Müller marcus.mueller at ettus.com
Mon Oct 2 04:29:46 EDT 2017

Hi Hafiz,

this is a GNU Radio question, and not directly related to USRPs. I'd
recommend you address this to the discuss-gnuradio list, to which you
can sign up on [1], instead.

Best regards,

[1] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

On 02.10.2017 08:39, Hafiz Hashim Imtiaz via USRP-users wrote:
> Hi,
> Is it possible to make a signal processing block which contains two
> input ports, one is byte type and the other is complex type. The only
> output port is also complex type. The byte type input port would just
> act like a controller port that when it receives "1", it allows data
> to flow form input complex port to output complex port.
> If it is not possible, is there any alternative way to do this job in
> gnuradio companion?
> regards,
> Hafiz Hashim Imtiaz
> Research Assistant
> Information Technology University, Punjab
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171002/5b719f62/attachment-0002.html>

More information about the USRP-users mailing list