[USRP-users] RFNoC OOT Module Error with FPGA Image

John Medrano john.d.medrano at gmail.com
Thu Nov 30 15:09:02 EST 2017


Hello Jose,

Based on the information you have posted I suspect it is an error in you
$ROOTDIR/rfnoc/blocks/$MODULE_NAME.xml file.

You may be reading a value before it has been initialized, look at
arguments section and make sure you are not reading a value before it has
been written.

Good luck.

On Tue, Nov 28, 2017 at 3:59 PM, Avila, Jose A via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hello we are getting the following error when probing the FPGA in X310
> after installing the created bit file.
>
>
> *Error:Runtime error: Cannot get() on an uninitialized (empty) property.*
>
>
> The testbench runs successfully but after creating the bit file and
> uploading it into the SDR we get the error when probing.
>
>
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171130/917f2281/attachment-0002.html>


More information about the USRP-users mailing list