[USRP-users] Posible error in b200 documentation

Francisco Albani francisco.albani at gmail.com
Thu Nov 30 15:04:05 EST 2017


In *"Changing the Master Clock Rate"* (
https://files.ettus.com/manual/page_usrp_b200.html#b200_mcr ) I see this:

*[...] The clock rate can be set to any value between 5 MHz and 61.44 MHz

But I found that to be false, and able to lower the *master_clock_rate*
down to *220 kHz*:

uhd_usrp_probe --args="master_clock_rate=220e3"
linux; GNU C++ version 4.9.2; Boost_105500;

-- Detected Device: B200
-- Operating over USB 3.
-- Initialize CODEC control...
-- Initialize Radio control...
-- Performing register loopback test... pass
-- Performing CODEC loopback test... pass
-- Asking for clock rate 0.220000 MHz...
-- Actually got clock rate 0.220000 MHz.
-- Performing timer loopback test... pass

I also tried lowering it to 2 MHz inside a working tx application
(with an external demodulator) and went fine.

Hope it helps.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171130/d0df460e/attachment-0002.html>

More information about the USRP-users mailing list