[USRP-users] USRP FPGA programming with RFNoC

Marcus D. Leech mleech at ripnet.com
Fri Nov 17 13:58:26 EST 2017


On 11/17/2017 01:34 PM, André Gomes via USRP-users wrote:
> Hi,
>
> I'm a little bit confused about the RFNoC project. The information 
> page (reference link <https://kb.ettus.com/RFNoC>) says it is 
> compatible with USRPs from 3rd generation on. Then, it 
> lists E310/E312/X300/X310. However, devices such as B200 and B210 also 
> belong to 3rd generation (reference link 
> <https://files.ettus.com/manual/md_usrp3_build_instructions.html>). 
> So, my question is: Is B2*0 compatible with RFNoC?
>
> Cheers,
>
> *André Gomes*
> Email: andre.gomes at dcc.ufmg.br <mailto:andre.gomes at dcc.ufmg.br>
> Homepage: http://homepages.dcc.ufmg.br/~andre.gomes/ 
> <http://homepages.dcc.ufmg.br/%7Eandre.gomes/>
> Mobile: +55 31 994859285 <tel:+55%2031%2099485-9285>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
No, it is not.

The FPGA on B2xx is not supported by Vivado, and in any case, is rather 
too small to support RFNoC, even without the Vivado restriction.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20171117/b9c7e628/attachment-0002.html>


More information about the USRP-users mailing list