[USRP-users] X310 Channel Command Issue

mleech at ripnet.com mleech at ripnet.com
Mon Jul 31 14:11:38 EDT 2017


You'll find this information useful: 

https://kb.ettus.com/Using_Dual_10_Gigabit_Ethernet_on_the_USRP_X300/X310


On 2017-07-31 13:13, Mark Koenig wrote:

> What is the minimum UHD version required? 
> 
> FROM: "mleech at ripnet.com" <mleech at ripnet.com>
> DATE: Monday, July 31, 2017 at 1:11 PM
> TO: Mark Koenig <mark.koenig at iubelttechnologies.com>
> CC: "usrp-users at lists.ettus.com" <usrp-users at lists.ettus.com>
> SUBJECT: Re: [USRP-users] X310 Channel Command Issue 
> 
> You'll need a much-more-recent version of UHD to support dual-ethernet mode. 
> 
> We need to see the part of your code that creates the usrp device object, specifies the device address details, etc, and also how you create your streamers. 
> 
> On 2017-07-31 12:46, Mark Koenig wrote: 
> 
> I am using version 003.008.004. 
> 
> I am uncertain of what part of the code you are referring to that sets up the motherboard. 
> 
> FROM: "mleech at ripnet.com" <mleech at ripnet.com>
> DATE: Monday, July 31, 2017 at 12:41 PM
> TO: Mark Koenig <mark.koenig at iubelttechnologies.com>
> CC: "usrp-users at lists.ettus.com" <usrp-users at lists.ettus.com>
> SUBJECT: Re: [USRP-users] X310 Channel Command Issue 
> 
> What version of UHD are you using?
> 
> We'd need to see the part of your code that sets up the motherboard, etc. 
> 
> We don't have enough details to diagnose your problem. 
> 
> On 2017-07-31 12:32, Mark Koenig via USRP-users wrote: 
> 
> I am having issue communicating with both channels on the X310.  I have 2 UBX-40 daughtercards installed in the x310, and am using the 10 Gig port as well as the 1 Gig port, with the intention to use one port to control one channel and the other card to control the other channel.  Also, I am working in receive only for now. 
> 
> When I use "uhd_find_devices"  I get the following: 
> 
> UHD DEVICE 0 
> 
> Device Address: 
> 
> Type:  x300 
> 
> Addr:  192.168.10.2 
> 
> Fpga:  HGS 
> 
> Name: 
> 
> Serial:  30F5A3F 
> 
> UHD DEVICE 1 
> 
> Device Address: 
> 
> Type:  x300 
> 
> Addr:  192.168.40.2 
> 
> Fpga:  HGS 
> 
> Name: 
> 
> Serial:  30F5A3F 
> 
> I also have the host PC ip addresses assigned correct;  192.168.10.1 and 192.168.40.1. 
> 
> Which leads me to believe the daughtercards have 2 different IP addresses.  The problem is that if I task either 10.2 or 40.2 I only ever communicate with the RF A channel, never the B channel. 
> 
> Can somebody please help me with this? 
> 
> Thank you 
> 
> Mark 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20170731/dfc4c6a1/attachment-0002.html>


More information about the USRP-users mailing list