[USRP-users] Disabling CORDIC

Marcus Müller marcus.mueller at ettus.com
Wed Jul 26 16:15:27 EDT 2017


Dear Altug,

yes, POLICY_MANUAL and dsp_freq = 0 will disable, and POLICY_NONE will
inhibit any change (so if you've not tuned the DSP before, it will
remain at 0).

Note that I'm still far from convinced that solves any of your problems!

Best regards,
Marcus


On 26.07.2017 13:08, altuğ kaya via USRP-users wrote:
> Hello everyone,
>
> When the full manual tuning policy is selected and 0 Hz rotation is
> configured:
>
>     tune_request.dsp_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
>     tune_request.dsp_freq = 0.0;
>
>
>  or when the  policy_none is selected;
>
>     tune_request.dsp_freq_policy = uhd::tune_request_t::POLICY_NONE;
>
>
> Are both RX channels' CORDIC  disabled?
>
> Sincerely,
> Altug
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20170726/4bb1d1c1/attachment-0002.html>


More information about the USRP-users mailing list