[USRP-users] How to use multiple PCs with one USRP X310
phonglt03 at gmail.com
Tue Jul 25 01:20:10 EDT 2017
I'm using RFNoC with X310 and I'd like to use multiple PCs to get data from
CE blocks via Ethernet (e.g. PC1 get/set data for CE1 and CE2, PC2 get/set
data for CE3 and CE4...).
Could you help me, please?
On Tue, Jul 25, 2017 at 10:47 AM, Neel Pandeya <neel.pandeya at ettus.com>
> Hello LTP:
> What exactly are you trying to do? Are you trying to connect multiple host
> computers to a single X310? Do you want to do this over Ethernet, PCIe, or
> both? Do you want to operate the X310 simultaneously from multiple host
> computers, or stream data to/from multiple host computers simultaneously?
> Are you using RFNoC with your X310?
> You may want to contact Novator directly for more information about their
> NC-10 USRP Channelization Toolkit.
> --Neel Pandeya
> On 24 July 2017 at 20:00, L TP via USRP-users <usrp-users at lists.ettus.com>
>> Hi lists,
>> I've found that NC-10 USRP (http://novatorsolutions.se/wp
>> 128-sources-and-beamforming.pdf) allow multiple PCs connect to it to get
>> data via PCIe or SFP+ interfaces.
>> Could you tell me more about can I use multiple PCs connecting with USRP
>> X310 to get data from CEs via SFP+ interfaces, please?
>> Thanks in advances.
>> With best regards,
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users