[USRP-users] SBX initial saturation

Neel Pandeya neel.pandeya at ettus.com
Wed Jul 19 20:24:29 EDT 2017


Hello Amirhosein:

Could you please describe this issue in more detail? What gain setting are
you using? What is your input power?

Please note that you should not input more than -15 dBm into the SBX at any
time.

--​Neel Pandeya




On 29 April 2017 at 00:53, Amirhosein naseri via USRP-users <
usrp-users at lists.ettus.com> wrote:

> Hi
>
> I have n210 with SBX daughterboard . when I start capturing sample after a
> while that usurp was off, after starting SBX is in saturation and keep in
> this state .... after 5 to 10 minutes, SBX start to work correctly, why?
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20170719/3c52189d/attachment-0002.html>


More information about the USRP-users mailing list