[USRP-users] USRP E310 TX sample rate limit

Marcus Müller marcus.mueller at ettus.com
Mon Jul 10 05:52:23 EDT 2017


Dear Boris,

that's defined by how much of your CPU is used by the TX flowgraph, and
where you get your data from that you transmit. Generally, 2MHz should
definitely work, if you just generate a constant data stream.

Best regards,

Marcus


On 07/10/2017 11:38 AM, Boris Isakanov via USRP-users wrote:
>
> I would like to use a sample rate of 2MHz, which produces an 'under
> run' error. 20,000Hz do work.
>
> The question is what is the USRP E310 sample rate limit?
>
>  
>
> Thanks,
>
>  
>
> Boris Isakhanov
>
>  
>
> Software Engineer
>
> Ha'marpe 5, Har Hozvim
>
> P.O.B. 45102, Jerusalem,
>
> 9777405  Israel
> Tel: +972-2-5868330
>
> Fax: +972-2-5868550
>
> E-mail:borisi at accubeat.co.il <mailto:alex at accubeat.co.il>
>
>  
>
> cid:image006.jpg at 01D248CD.62F20750 <http://www.accubeat.com/>
>
>  
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20170710/c6616635/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3846 bytes
Desc: not available
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20170710/c6616635/attachment.jpe>


More information about the USRP-users mailing list