[USRP-users] Pause after "Register loopback test passed"

Martin Braun martin.braun at ettus.com
Wed Jul 5 20:47:32 EDT 2017


Can you increase the log level and try again? You'll need to set
UHD_LOG_MIN_LEVEL to trace and then export UHD_LOG_LEVEL=trace in your bash.

-- M

On 05/25/2017 10:38 AM, Cho, Daniel J (332C) via USRP-users wrote:
>  
> 
>  
> 
> *From:* Cho, Daniel J (332C)
> *Sent:* Thursday, May 25, 2017 10:38 AM
> *To:* Cho, Daniel J (332C) <daniel.j.cho at jpl.nasa.gov>
> *Subject:* RE: Pause after "Register loopback test passed"
> 
>  
> 
> When cross compiling, the instructions state that the example codes get
> installed in a lib directory.  In ~/usr/ directory, I do not have a lib
> directory and my examples are getting installed in
> ~/usr/src/uhd/host/build/examples/.
> 
>  
> 
> *From:* USRP-users [mailto:usrp-users-bounces at lists.ettus.com] *On
> Behalf Of *Cho, Daniel J (332C) via USRP-users
> *Sent:* Thursday, May 25, 2017 9:51 AM
> *To:* usrp-users at lists.ettus.com <mailto:usrp-users at lists.ettus.com>
> *Subject:* [USRP-users] Pause after "Register loopback test passed"
> 
>  
> 
> Hello –
> 
>  
> 
> I am trying to compile and run my own code by cross compiling as
> instructed here:
> https://kb.ettus.com/Software_Development_on_the_E310_and_E312
> 
>  
> 
> Instead of using the e3xx-rfnoc recipe, I am using the e3xx-default
> and/or the e3xx-custom-uhd recipe.  So after going through all the steps
> (I compile and link an executable of the example codes), I mount it onto
> the USRP and source the set_env file as instructed.  When I try and run
> any of the example programs that I cross compiled, it goes down to
> “register loopback test passed” and it just stops. 
> 
>  
> 
>  
> 
> I am initially trying to recompile the example code and see if I can run
> the recompiled code before trying to compile my own code.  Anyone know
> why it is just stopping there?
> 
>  
> 
> Thanks
> 
>  
> 
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> 





More information about the USRP-users mailing list