[USRP-users] E310 Quickstart directions don't seem to work

Martin Braun martin.braun at ettus.com
Wed Jul 5 17:53:51 EDT 2017


Looks like the sshfs command is going one directory to high on the
hosting side (e.g., sshfs user at host:path/ instead of sshfs
user at host:path/usr/).

Cheers,
Martin

On 06/20/2017 06:03 AM, Jason Matusiak via USRP-users wrote:
> I got it.  I needed to go into ~/usr/usr and change set_env to have
> LOCALPREFIX=~/usr/usr.  Then once i sourced that set_env all was good.
> 
> 
> On 06/20/2017 08:33 AM, Jason Matusiak wrote:
>> I was attempting to muck with one of my E310s and decided to follow
>> the directions from here:
>> https://kb.ettus.com/Software_Development_on_the_E310_and_E312#QUICKSTART
>> to set it up for RFNoC.
>>
>> I followed the directions, but when I source the setup_env.sh in
>> /home/root/usr, nothing happens.  Looking into the file, I see that it
>> is setting up all the directories to be the same as my host machine
>> (/home/jmat/prefix) instead of where they should be on the E310
>> (/home/root/usr).
>>
>> Is there a step missing from the directions that keep the paths from
>> being absolute?  Otherwise, I don't see how the setup can work as-is.
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com





More information about the USRP-users mailing list