[USRP-users] Multi-PC Sync
marcus.mueller at ettus.com
Tue Mar 29 15:11:21 EDT 2016
You must use timed commands to tune the RF frontends, so that they are
phase-synchronous; otherwise, the tuning timing, and hence the phase,
will be random each time.
On 29.03.2016 21:05, Gorlinski, Charlie @ SSG - PE - IEC via USRP-users
> Hi Ettus,
> I am successfully streaming 2 X310s on one Linux PC. Using a
> slightly modified version of tx_samples_from_file, the carriers of all
> 4 RF output channels are nicely synced together using an Octoclock to
> distribute 10MHZ and 1PPS from a Rubidium clock to each X310.
> I want to sync a 2^nd Linux PC with 2 more X310s and sync those 4 RF
> outputs channels to the same Octoclock, so that I wind up with all 8
> RF carriers synced together from the 2 PCs. I can successfully
> instruct the modified tx_samples_from_file on PC#2 to start at the
> same 1PPS as PC#1, but the 4 RF carriers from PC#2 are NOT locked to
> the 4 carriers of PC#1 even though the X310s in each share the same
> clock and 1PPS distribution.
> What do you recommend for RF carrier synchronization between 2 PCs,
> each with their own X310s that share a common 10MHz and 1PPS?
> This e-mail and any attachments are solely for the use of the
> addressee and may contain L-3 proprietary information that may also be
> defined as U.S. Government export controlled technical data. If you
> are an unintended recipient of this e-mail, use, disclosure or
> distribution of its content is prohibited. Please notify the sender
> by return e-mail and immediately delete this message.
> USRP-users mailing list
> USRP-users at lists.ettus.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users