[USRP-users] (no subject)

Diyar Muhammed diyar.muhammed at mhe-krg.org
Wed Mar 23 18:09:00 EDT 2016


Dear All,
I assembled usrp x310, and I had a warning, so I downloaded FPGA image and
then I have upgraded FPGA by using the command: usrp_x3xx_fpga_burner
--addr=192.168.10.2
--fpga-path=/usr/local/share/uhd/images/usrp_x310_fpga_HGS.bit.
after that the usrp x310 is able to find daughter board, but still I have a
UHD warning as shown in the below, as shown below:

mint at mint ~ $ uhd_usrp_probe 192.168.10.2
linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.001-105-g91ae742f


UHD Warning:
    X300 unknown product code in EEPROM: 30818

UHD Warning:
    X300 unknown product code in EEPROM: 30818

UHD Warning:
    X300 unknown product code in EEPROM: 30818

UHD Warning:
    X300 unknown product code in EEPROM: 30818
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...

UHD Warning:
    X300 unknown product code in EEPROM: 30818
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Initialize Radio control...
-- Performing register loopback test... pass
-- Performing register loopback test... pass
-- Initializing clock and time using internal sources... done
  _____________________________________________________
 /
|       Device: X-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: X300?
|   |   revision: 8
|   |   product: 30818
|   |   mac-addr0: 00:80:2f:23:7b:6f
|   |   mac-addr1: 00:80:2f:23:7b:70
|   |   gateway: 192.168.10.1
|   |   ip-addr0: 192.168.10.2
|   |   subnet0: 255.255.255.0
|   |   ip-addr1: 192.168.20.2
|   |   subnet1: 255.255.255.0
|   |   ip-addr2: 192.168.30.2
|   |   subnet2: 255.255.255.0
|   |   ip-addr3: 192.168.40.2
|   |   subnet3: 255.255.255.0
|   |   serial: 30C0991
|   |   FW Version: 3.0
|   |   FPGA Version: 9.0
|   |
|   |   Time sources: internal, external, gpsdo
|   |   Clock sources: internal, external, gpsdo
|   |   Sensors: ref_locked
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 0
|   |   |   Freq range: -100.000 to 100.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX DSP: 1
|   |   |   Freq range: -100.000 to 100.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: A
|   |   |   ID: UBX-160 v1 (0x007a)
|   |   |   Serial: 30C2AAB
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: UBX RX
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 10.000 to 6000.000 MHz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: A
|   |   |   |   Name: ads62p48
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |     _____________________________________________________
|   |    /
|   |   |       RX Dboard: B
|   |   |   ID: UBX-160 v1 (0x007a)
|   |   |   Serial: 30C2A33
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Frontend: 0
|   |   |   |   Name: UBX RX
|   |   |   |   Antennas: TX/RX, RX2, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 10.000 to 6000.000 MHz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: IQ
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       RX Codec: B
|   |   |   |   Name: ads62p48
|   |   |   |   Gain range digital: 0.0 to 6.0 step 0.5 dB
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 0
|   |   |   Freq range: -100.000 to 100.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       TX DSP: 1
|   |   |   Freq range: -100.000 to 100.000 MHz
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: A
|   |   |   ID: UBX-160 v1 (0x0079)
|   |   |   Serial: 30C2AAB
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: UBX TX
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 10.000 to 6000.000 MHz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: A
|   |   |   |   Name: ad9146
|   |   |   |   Gain Elements: None
|   |     _____________________________________________________
|   |    /
|   |   |       TX Dboard: B
|   |   |   ID: UBX-160 v1 (0x0079)
|   |   |   Serial: 30C2A33
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Frontend: 0
|   |   |   |   Name: UBX TX
|   |   |   |   Antennas: TX/RX, CAL
|   |   |   |   Sensors: lo_locked
|   |   |   |   Freq range: 10.000 to 6000.000 MHz
|   |   |   |   Gain range PGA0: 0.0 to 31.5 step 0.5 dB
|   |   |   |   Connection Type: QI
|   |   |   |   Uses LO offset: No
|   |   |     _____________________________________________________
|   |   |    /
|   |   |   |       TX Codec: B
|   |   |   |   Name: ad9146
|   |   |   |   Gain Elements: None

mint at mint ~ $

What I have to do to sort out that?
in advance many thanks.
-- 
Regards,
Diyar Muhammed
Ministry of Higher Education and Scientific Research
Duty: Network Administration and Design
Website:  www.mhe-krg.org
Cell Phone: 009647504690060
Office Phone:   00964662554683
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160323/ef1260cc/attachment-0002.html>


More information about the USRP-users mailing list