[USRP-users] Modelsim execute error for option -64
jonathon.pendlum at ettus.com
Sun Mar 20 15:43:49 EDT 2016
The current head commit is fine.
On Sun, Mar 20, 2016 at 12:41 PM, Swanson, Craig <
Craig.Swanson at gtri.gatech.edu> wrote:
> Thanks. What commit would be best to use if I plan on using the IIR filter
> and 1-in-N testbench and rfnoc block?
> Sent from my iPhone
> On Mar 20, 2016, at 3:34 PM, Jonathon Pendlum <jonathon.pendlum at ettus.com>
> Hi Craig,
> This is an error with Vivado. Make a symbolic link
> /opt/mentor/modelsim/modelsim_dlx/bin/linux_x86_64pe pointing
> to /opt/mentor/modelsim/modelsim_dlx/bin/linuxpe.
> On Sat, Mar 19, 2016 at 11:09 AM, Swanson, Craig <
> Craig.Swanson at gtri.gatech.edu> wrote:
>> I have not run a Modelsim simulation in about three months. This week I
>> decided to upgrade my uhd/fpga-src to the latest rev in git.
>> I tried running the noc_block_qpsk testbench and I got the following
>> Failed to open executable
>> /opt/mentor/modelsim/modelsim_dlx/bin/../linuxpe/../linux_x86_64pe/vish in
>> execute mode needed for the option -64.
>> execv: No such file or directory
>> ** Fatal: Unable to exec the GUI
>> Do you have any ideas on where I can start looking for how to fix this
>> *Craig F. Swanson*
>> *Research Engineer II *
>> *Information and Communications Laboratory*
>> *Communications, Systems, and Spectrum Division*
>> *Georgia Tech Research Institute*
>> *Room 560 250 14th St NW *
>> *Atlanta, GA 30318*
>> *Cell: 770.298.9156 <770.298.9156>*
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users