[USRP-users] TX/RX Calibration

David Protzman davidp at department13.com
Fri Mar 18 14:24:56 EDT 2016


Roger that.  Thank you!

On Fri, Mar 18, 2016 at 2:17 PM, Marcus D. Leech via USRP-users <
usrp-users at lists.ettus.com> wrote:

> On 03/18/2016 02:10 PM, Dave NotTelling via USRP-users wrote:
>
> Just to be clear, there should be nothing attached to the SMA connectors
> on the radio with doing TX/RX calibrations right?  I know it says it in the
> manual, but for the TX calibration I want to be 100% sure before running
> with an antenna.
>
> Sorry for the likely dumb question.  Don't want to risk some expensive
> equipment :)
>
> -Dave
>
>
> _______________________________________________
> USRP-users mailing listUSRP-users at lists.ettus.comhttp://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
> The calibrations use very low power, so there's no risk.
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>


-- 
David Protzman
Department 13
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160318/6cf8b4a7/attachment-0002.html>


More information about the USRP-users mailing list