[USRP-users] TX/RX Calibration

Marcus D. Leech mleech at ripnet.com
Fri Mar 18 14:17:27 EDT 2016


On 03/18/2016 02:10 PM, Dave NotTelling via USRP-users wrote:
> Just to be clear, there should be nothing attached to the SMA 
> connectors on the radio with doing TX/RX calibrations right?  I know 
> it says it in the manual, but for the TX calibration I want to be 100% 
> sure before running with an antenna.
>
> Sorry for the likely dumb question.  Don't want to risk some expensive 
> equipment :)
>
> -Dave
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
The calibrations use very low power, so there's no risk.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160318/63b74134/attachment-0002.html>


More information about the USRP-users mailing list