[USRP-users] E310 Tx Rx Loopback using GNU Radio

Marcus D. Leech mleech at ripnet.com
Fri Mar 11 10:43:54 EST 2016


On 03/11/2016 09:51 AM, BHUSHAN PAWAR via USRP-users wrote:
> Hi all,
>
> I am trying to achieve simple Rx to Tx loopback using GNU Radio.
> As you can see in the attached image, I have connected UHD USRP Source 
> to UHD USRP sink via a Multiply Constant block.
> Using a signal generator, I am providing 10MHz signal to the RX2 input 
> and trying to transmit signal from both transmitter channels.
>
> However, I can observe a distorted signal from TRX-B channel but no 
> signal from TRX-A channel on the oscilloscope..What is the reason for 
> this?
>
>
> *
>
>
> Thanks & Regards,*
> *Bhushan R.V. Pawar.*
>
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
The lowest tunable frequency on the E310 is 70MHz.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160311/4c663f9e/attachment-0002.html>


More information about the USRP-users mailing list