[USRP-users] Data corruption with X3x0/UBX-160 receive at 200 Msps

Michael West michael.west at ettus.com
Mon Mar 7 17:31:46 EST 2016


Hi Mike,

The errors could also be due to clipping.  Your gain settings could be too
high.

Regards,
Michael

On Mon, Mar 7, 2016 at 7:42 AM, Mike Williams via USRP-users <
usrp-users at lists.ettus.com> wrote:

> We are using an X300/UBX-160 programmed UHD-3.9.2 to record data at 200
> Msps using the rx_samples_to_file example program.  We are seeing data
> corruption that appears to be due to bit errors in some I or Q samples.
> The self cal of the adc capture and transfer delays works fine so maybe
> this is a timing error elsewhere in the FPGA?
>
> We've tried an X310 as well and have the same problem.
>
> Mike
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160307/07ff872c/attachment-0002.html>


More information about the USRP-users mailing list