[USRP-users] E310 Query

BHUSHAN PAWAR bhushan.rv.pawar at gmail.com
Tue Mar 1 09:39:22 EST 2016


Dear all,

Thanks for the reply.

For the Release-4-sg1, I find two versions, -demo and -dev on the link
http://files.ettus.com/e3xx_images/e3xx-release-4/ettus-e3xx-sg1/

Which one should I download? As I want to use basic provided examples and
then modify it according to my requirements.



*Thanks & Regards,*

*Bhushan R.V. Pawar.*


On Tue, Mar 1, 2016 at 1:58 PM, Philip Balister <philip at opensdr.com> wrote:

> On 03/01/2016 04:47 AM, BHUSHAN PAWAR via USRP-users wrote:
> > I tried the commands in terminal but got this error msg,
> >
>
> E310 only supports Qt gui apps.
>
> You are running an older file system for the the E310. I believe that
> updating to release-4 may have a qt gui based version of uhd_fft.
>
> Philip
>
>
> > Kindly tell me the solution for it.
> >
> > pawa_bh at Ubuntu14:~$ ssh -X root at 192.168.200.1
> > root at 192.168.200.1's password:
> > root at ettus-e300:~# cat /etc/version-image
> > Timestamp: 201505131744
> > Release: Release-2
> > Image: gnuradio-dev-image
> > root at ettus-e300:~# cat /etc/build
> > *cat: /etc/build: No such file or directory*
> >
> >
> > root at ettus-e300:~# uhd_usrp_probe
> > linux; GNU C++ version 4.9.1; Boost_105600; UHD_003.008.004-0-unknown
> >
> > -- Loading FPGA image: /usr/share/uhd/images/usrp_e310_fpga.bit... done
> > -- Detecting internal GPSDO.... found
> > -- Initializing core control...
> > -- Performing register loopback test... pass
> > -- Performing register loopback test... pass
> > -- Performing register loopback test... pass
> > -- Performing CODEC loopback test... pass
> > -- Performing CODEC loopback test... pass
> > -- Setting time source to internal
> > -- Asking for clock rate 32 MHz
> > -- Actually got clock rate 32 MHz
> > -- Performing timer loopback test... pass
> > -- Performing timer loopback test... pass
> > -- Initializing time to the internal GPSDO
> >   _____________________________________________________
> >  /
> > |       Device: E-Series Device
> > |     _____________________________________________________
> > |    /
> > |   |       Mboard: E310
> > |   |   product: 30674
> > |   |   revision: 4
> > |   |   serial: 30B05EF
> > |   |   mac-addr: 00:80:2f:23:12:84
> > |   |   FPGA Version: 6.0
> > |   |
> > |   |   Time sources: none, internal, external, gpsdo
> > |   |   Clock sources: internal
> > |   |   Sensors: temp, gps_locked, gps_time, ref_locked
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       RX DSP: 0
> > |   |   |   Freq range: -16.000 to 16.000 MHz
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       RX DSP: 1
> > |   |   |   Freq range: -16.000 to 16.000 MHz
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       RX Dboard: A
> > |   |   |   ID: E310 MIMO XCVR (0x0110)
> > |   |   |   Serial: 30AA742
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       RX Frontend: A
> > |   |   |   |   Name: FE-RX2
> > |   |   |   |   Antennas: TX/RX, RX2
> > |   |   |   |   Sensors: lo_locked, rssi
> > |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> > |   |   |   |   Gain range PGA: 0.0 to 76.0 step 1.0 dB
> > |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> > |   |   |   |   Connection Type: IQ
> > |   |   |   |   Uses LO offset: No
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       RX Frontend: B
> > |   |   |   |   Name: FE-RX1
> > |   |   |   |   Antennas: TX/RX, RX2
> > |   |   |   |   Sensors: lo_locked, rssi
> > |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> > |   |   |   |   Gain range PGA: 0.0 to 76.0 step 1.0 dB
> > |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> > |   |   |   |   Connection Type: IQ
> > |   |   |   |   Uses LO offset: No
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       RX Codec: A
> > |   |   |   |   Name: E3x0 RX dual ADC
> > |   |   |   |   Gain Elements: None
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       TX DSP: 0
> > |   |   |   Freq range: -16.000 to 16.000 MHz
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       TX DSP: 1
> > |   |   |   Freq range: -16.000 to 16.000 MHz
> > |   |     _____________________________________________________
> > |   |    /
> > |   |   |       TX Dboard: A
> > |   |   |   ID: E310 MIMO XCVR (0x0110)
> > |   |   |   Serial: 30AA742
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       TX Frontend: A
> > |   |   |   |   Name: FE-TX2
> > |   |   |   |   Antennas: TX/RX
> > |   |   |   |   Sensors: lo_locked
> > |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> > |   |   |   |   Gain range PGA: 0.0 to 89.8 step 0.2 dB
> > |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> > |   |   |   |   Connection Type: IQ
> > |   |   |   |   Uses LO offset: No
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       TX Frontend: B
> > |   |   |   |   Name: FE-TX1
> > |   |   |   |   Antennas: TX/RX
> > |   |   |   |   Sensors: lo_locked
> > |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> > |   |   |   |   Gain range PGA: 0.0 to 89.8 step 0.2 dB
> > |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> > |   |   |   |   Connection Type: IQ
> > |   |   |   |   Uses LO offset: No
> > |   |   |     _____________________________________________________
> > |   |   |    /
> > |   |   |   |       TX Codec: A
> > |   |   |   |   Name: E3x0 TX dual DAC
> > |   |   |   |   Gain Elements: None
> >
> > root at ettus-e300:~# uhd_fft
> > linux; GNU C++ version 4.9.1; Boost_105600; UHD_003.008.004-0-unknown
> >
> >
> >
> > *Error importing GNU Radio's wxgui. Please make sure gr-wxgui is
> installed.*
> > *Thanks & Regards,*
> >
> > *Bhushan R.V. Pawar.*
> >
> >
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users at lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20160301/4ba09449/attachment-0002.html>


More information about the USRP-users mailing list