[USRP-users] E310 Query

Philip Balister philip at opensdr.com
Tue Mar 1 07:58:26 EST 2016


On 03/01/2016 04:47 AM, BHUSHAN PAWAR via USRP-users wrote:
> I tried the commands in terminal but got this error msg,
> 

E310 only supports Qt gui apps.

You are running an older file system for the the E310. I believe that
updating to release-4 may have a qt gui based version of uhd_fft.

Philip


> Kindly tell me the solution for it.
> 
> pawa_bh at Ubuntu14:~$ ssh -X root at 192.168.200.1
> root at 192.168.200.1's password:
> root at ettus-e300:~# cat /etc/version-image
> Timestamp: 201505131744
> Release: Release-2
> Image: gnuradio-dev-image
> root at ettus-e300:~# cat /etc/build
> *cat: /etc/build: No such file or directory*
> 
> 
> root at ettus-e300:~# uhd_usrp_probe
> linux; GNU C++ version 4.9.1; Boost_105600; UHD_003.008.004-0-unknown
> 
> -- Loading FPGA image: /usr/share/uhd/images/usrp_e310_fpga.bit... done
> -- Detecting internal GPSDO.... found
> -- Initializing core control...
> -- Performing register loopback test... pass
> -- Performing register loopback test... pass
> -- Performing register loopback test... pass
> -- Performing CODEC loopback test... pass
> -- Performing CODEC loopback test... pass
> -- Setting time source to internal
> -- Asking for clock rate 32 MHz
> -- Actually got clock rate 32 MHz
> -- Performing timer loopback test... pass
> -- Performing timer loopback test... pass
> -- Initializing time to the internal GPSDO
>   _____________________________________________________
>  /
> |       Device: E-Series Device
> |     _____________________________________________________
> |    /
> |   |       Mboard: E310
> |   |   product: 30674
> |   |   revision: 4
> |   |   serial: 30B05EF
> |   |   mac-addr: 00:80:2f:23:12:84
> |   |   FPGA Version: 6.0
> |   |
> |   |   Time sources: none, internal, external, gpsdo
> |   |   Clock sources: internal
> |   |   Sensors: temp, gps_locked, gps_time, ref_locked
> |   |     _____________________________________________________
> |   |    /
> |   |   |       RX DSP: 0
> |   |   |   Freq range: -16.000 to 16.000 MHz
> |   |     _____________________________________________________
> |   |    /
> |   |   |       RX DSP: 1
> |   |   |   Freq range: -16.000 to 16.000 MHz
> |   |     _____________________________________________________
> |   |    /
> |   |   |       RX Dboard: A
> |   |   |   ID: E310 MIMO XCVR (0x0110)
> |   |   |   Serial: 30AA742
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       RX Frontend: A
> |   |   |   |   Name: FE-RX2
> |   |   |   |   Antennas: TX/RX, RX2
> |   |   |   |   Sensors: lo_locked, rssi
> |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> |   |   |   |   Gain range PGA: 0.0 to 76.0 step 1.0 dB
> |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> |   |   |   |   Connection Type: IQ
> |   |   |   |   Uses LO offset: No
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       RX Frontend: B
> |   |   |   |   Name: FE-RX1
> |   |   |   |   Antennas: TX/RX, RX2
> |   |   |   |   Sensors: lo_locked, rssi
> |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> |   |   |   |   Gain range PGA: 0.0 to 76.0 step 1.0 dB
> |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> |   |   |   |   Connection Type: IQ
> |   |   |   |   Uses LO offset: No
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       RX Codec: A
> |   |   |   |   Name: E3x0 RX dual ADC
> |   |   |   |   Gain Elements: None
> |   |     _____________________________________________________
> |   |    /
> |   |   |       TX DSP: 0
> |   |   |   Freq range: -16.000 to 16.000 MHz
> |   |     _____________________________________________________
> |   |    /
> |   |   |       TX DSP: 1
> |   |   |   Freq range: -16.000 to 16.000 MHz
> |   |     _____________________________________________________
> |   |    /
> |   |   |       TX Dboard: A
> |   |   |   ID: E310 MIMO XCVR (0x0110)
> |   |   |   Serial: 30AA742
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       TX Frontend: A
> |   |   |   |   Name: FE-TX2
> |   |   |   |   Antennas: TX/RX
> |   |   |   |   Sensors: lo_locked
> |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> |   |   |   |   Gain range PGA: 0.0 to 89.8 step 0.2 dB
> |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> |   |   |   |   Connection Type: IQ
> |   |   |   |   Uses LO offset: No
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       TX Frontend: B
> |   |   |   |   Name: FE-TX1
> |   |   |   |   Antennas: TX/RX
> |   |   |   |   Sensors: lo_locked
> |   |   |   |   Freq range: 50.000 to 6000.000 MHz
> |   |   |   |   Gain range PGA: 0.0 to 89.8 step 0.2 dB
> |   |   |   |   Bandwidth range: 200000.0 to 56000000.0 step 0.0 Hz
> |   |   |   |   Connection Type: IQ
> |   |   |   |   Uses LO offset: No
> |   |   |     _____________________________________________________
> |   |   |    /
> |   |   |   |       TX Codec: A
> |   |   |   |   Name: E3x0 TX dual DAC
> |   |   |   |   Gain Elements: None
> 
> root at ettus-e300:~# uhd_fft
> linux; GNU C++ version 4.9.1; Boost_105600; UHD_003.008.004-0-unknown
> 
> 
> 
> *Error importing GNU Radio's wxgui. Please make sure gr-wxgui is installed.*
> *Thanks & Regards,*
> 
> *Bhushan R.V. Pawar.*
> 
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> 





More information about the USRP-users mailing list