[USRP-users] Installing PCIE drivers for x310

Ian Buckley ianb at ionconcepts.com
Thu Oct 29 23:05:07 EDT 2015


It's common on motherboards to have physically larger PCIe slots than their electrical connectivity, in this case slot 1 has only 1 PCIe lane connected.
Try slots 3 or 4 (The x8 ones)
-Ian

On Oct 29, 2015, at 7:19 PM, James Humphries via USRP-users <usrp-users at lists.ettus.com> wrote:

> I believe that is your issue.
> 
> lnkCap: Link Capabilities, shows correct x4 
> lnkSta: Link Status; Indicates that it is operating at x1 speed
> 
> I'm not sure how to resolve this right at the moment, I'll do some reading. Maybe someone else can offer some insight onto how to resolve the link speeds?
> 
> -Trip
> 
> On Thu, Oct 29, 2015 at 10:09 PM, Jared Dulmage via USRP-users <usrp-users at lists.ettus.com> wrote:
> The output of the command you recommended was quite large.  I removed stuff that looked purely related to the CPUs.  I believe what's left are the peripherals plugged into the PCIe bus.  Seach down for "Instruments" to find the x310 entry.  There are a number of things plugged in, but not necessarily being used, e.g. I have nothing plugged into one of the gigE NICs or the other peripheral ports.  I'm not sure but you might be right, the LnkCap seems to suggest 4x capable, but it seems the LnkSta says 1x, if I'm reading that right.
> 
> > lcpci -vv
> 
> 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 05)
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin B routed to IRQ 73
>         Region 0: I/O ports at f0f0 [size=8]
>         Region 1: I/O ports at f0e0 [size=4]
>         Region 2: I/O ports at f0d0 [size=8]
>         Region 3: I/O ports at f0c0 [size=4]
>         Region 4: I/O ports at f020 [size=32]
>         Region 5: Memory at ef64c000 (32-bit, non-prefetchable) [size=2K]
>         Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>                 Address: fee00378  Data: 0000
>         Capabilities: [70] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>         Capabilities: [b0] PCI Advanced Features
>                 AFCap: TP+ FLR+
>                 AFCtrl: FLR-
>                 AFStatus: TP-
>         Kernel driver in use: ahci
> 
> 00:1f.3 SMBus: Intel Corporation C600/X79 series chipset SMBus Host Controller (rev 05)
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin C routed to IRQ 11
>         Region 0: Memory at ef64b000 (64-bit, non-prefetchable) [size=256]
>         Region 4: I/O ports at f000 [size=32]
> 
> 01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 17
>         Region 0: Memory at ef500000 (32-bit, non-prefetchable) [size=128K]
>         Region 2: I/O ports at e000 [size=32]
>         Region 3: Memory at ef520000 (32-bit, non-prefetchable) [size=16K]
>         Capabilities: [c8] Power Management version 2
>                 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [e0] Express (v1) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <64us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
>                 Vector table: BAR=3 offset=00000000
>                 PBA: BAR=3 offset=00002000
>         Capabilities: [100 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>         Capabilities: [140 v1] Device Serial Number 74-46-a0-ff-ff-a0-df-1e
>         Kernel driver in use: e1000e
> 
> 02:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port SATA Storage Control Unit (rev 05)
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at e2800000 (64-bit, prefetchable) [size=16K]
>         Region 2: Memory at e2400000 (64-bit, prefetchable) [size=4M]
>         Region 4: I/O ports at d000 [size=256]
>         Capabilities: [98] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [c4] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
>                         MaxPayload 128 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>         Capabilities: [a0] MSI-X: Enable+ Count=2 Masked-
>                 Vector table: BAR=0 offset=00002000
>                 PBA: BAR=0 offset=00003000
>         Capabilities: [100 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>         Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
>                 ARICap: MFVC- ACS-, Next Function: 0
>                 ARICtl: MFVC- ACS-, Function Group: 0
>         Capabilities: [180 v1] Transaction Processing Hints
>                 Device specific mode supported
>                 No steering table available
>         Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
>                 IOVCap: Migration-, Interrupt Message Number: 000
>                 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>                 IOVSta: Migration-
>                 Initial VFs: 31, Total VFs: 31, Number of VFs: 0, Function Dependency Link: 00
>                 VF offset: 8, stride: 1, Device ID: 1d5b
>                 Supported Page Size: 00000553, System Page Size: 00000001
>                 Region 0: Memory at 00000000e2804000 (64-bit, prefetchable)
>                 VF Migration: offset: 00000000, BIR: 0
>         Kernel driver in use: isci
> 
> 05:00.0 VGA compatible controller: NVIDIA Corporation GK107GL [Quadro K2000] (rev a1) (prog-if 00 [VGA controller])
>         Subsystem: Hewlett-Packard Company Device 094c
>         Physical Slot: 2
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0
>         Interrupt: pin A routed to IRQ 92
>         Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
>         Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
>         Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
>         Region 5: I/O ports at c000 [size=128]
>         [virtual] Expansion ROM at ef000000 [disabled] [size=512K]
>         Capabilities: [60] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee00798  Data: 0000
>         Capabilities: [78] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 256 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
>                         ClockPM+ Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
>                          EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
>         Capabilities: [b4] Vendor Specific Information: Len=14 <?>
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed- WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [128 v1] Power Budgeting <?>
>         Capabilities: [420 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>         Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
>         Kernel driver in use: nvidia
> 
> 05:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
>         Subsystem: Hewlett-Packard Company Device 094c
>         Physical Slot: 2
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin B routed to IRQ 36
>         Region 0: Memory at ef080000 (32-bit, non-prefetchable) [size=16K]
>         Capabilities: [60] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [78] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 256 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
>                         ClockPM+ Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
>                          EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest+
>         Kernel driver in use: snd_hda_intel
> 
> 06:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe (rev 10)
>         Subsystem: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe
>         Physical Slot: 3
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 91
>         Region 0: Memory at ef430000 (64-bit, non-prefetchable) [size=64K]
>         Region 2: Memory at ef420000 (64-bit, non-prefetchable) [size=64K]
>         Expansion ROM at ef400000 [disabled] [size=128K]
>         Capabilities: [48] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>         Capabilities: [40] Vital Product Data
>                 Product Name: B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/\x00B‚/
>                 Unknown small resource type 00, will not decode more.
>         Capabilities: [60] Vendor Specific Information: Len=6c <?>
>         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee00778  Data: 0000
>         Capabilities: [cc] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
>                         ClockPM+ Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>         Capabilities: [100 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>         Capabilities: [13c v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed- WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [160 v1] Device Serial Number 00-0a-f7-ff-fe-17-f2-f0
>         Capabilities: [16c v1] Power Budgeting <?>
>         Kernel driver in use: tg3
> 
> 07:00.0 Signal processing controller: National Instruments PXIe/PCIe Device
>         Subsystem: National Instruments Device 7862
>         Physical Slot: 1
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 90
>         Region 0: Memory at ef300000 (32-bit, non-prefetchable) [size=1M]
>         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee00758  Data: 0000
>         Capabilities: [78] Power Management version 3
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [80] Express (v1) Endpoint, MSI 00
>                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 128 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>                 LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <4us, L1 <2us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [100 v1] Virtual Channel
>                 Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
>                 Arb:    Fixed- WRR32- WRR64- WRR128-
>                 Ctrl:   ArbSelect=Fixed
>                 Status: InProgress-
>                 VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>                         Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>                         Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>                         Status: NegoPending- InProgress-
>         Capabilities: [800 v1] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>         Kernel driver in use: niusrpriok
> 
> 08:00.0 USB controller: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller (rev 02) (prog-if 30 [XHCI])
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 19
>         Region 0: Memory at ef200000 (64-bit, non-prefetchable) [size=64K]
>         Region 2: Memory at ef210000 (64-bit, non-prefetchable) [size=8K]
>         Capabilities: [40] Power Management version 3
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [48] MSI: Enable- Count=1/8 Maskable- 64bit+
>                 Address: 0000000000000000  Data: 0000
>         Capabilities: [70] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 1024 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>                 LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us
>                         ClockPM+ Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>                          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>         Capabilities: [c0] MSI-X: Enable+ Count=8 Masked-
>                 Vector table: BAR=2 offset=00000000
>                 PBA: BAR=2 offset=00001000
>         Capabilities: [100 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>         Capabilities: [150 v1] Device Serial Number 08-00-28-00-00-20-00-00
>         Kernel driver in use: xhci_hcd
> 
> 09:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 70) (prog-if 10 [OHCI])
>         Subsystem: Hewlett-Packard Company Device 158a
>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 128 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 19
>         Region 0: Memory at ef100000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: [44] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>         Kernel driver in use: firewire_ohci
> 
> 
> Jared.
> ------------------------------------------------------
> Jared Dulmage
> Engineering Specialist
> Digital Comm. and Implementation Dept.
> Aerospace Corporation
> 310-336-3140
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20151029/3ed76682/attachment-0002.html>


More information about the USRP-users mailing list