[USRP-users] Setting Registers in the E310 Flowgraph RFNoC block and seeing them change using Chipscope

Martin Braun martin.braun at ettus.com
Mon Oct 26 13:12:15 EDT 2015

On 22.10.2015 15:57, Swanson, Craig wrote:
> Martin, I found the problem.  I needed to wait until the python
> script is already running.  It seems that the 50Mhz clock based
> signals can trigger even if the python script is running, but the
> radio clock won't.  So anything that is based off of the radio clock
> won't trigger until I run the script.

Yes, this is an E310-specific thing. radio_clk comes from the AD9361,
but that doesn't do anything until it's initialized.


More information about the USRP-users mailing list