[USRP-users] Octoclock-G Networking

Sumit Kumar cogwsn at gmail.com
Fri Oct 23 21:15:54 EDT 2015


Hi Michael,

Thanks for your reply. I think I will continue with non-ethernet version.
My application doesn't need NMEA thing as of now. Also I am a bit skeptical
to touch the firmware for the time being :D

Sumit

On Fri, Oct 23, 2015 at 10:02 PM, Michael West <michael.west at ettus.com>
wrote:

> Hi Sumit,
>
> The Octoclock-G ships with a firmware image that only supports the clock
> distribution without Ethernet support.  It is plug and play for clock
> distribution.  The Ethernet support provides access to the NMEA strings
> from the GPSDO.  To get Ethernet support, the new firmware must be loaded.
> As you found, the instructions to load the firmware are at
> http://files.ettus.com/manual/page_octoclock.html.  The firmware image
> for the latest UHD release (3.9.1) includes Ethernet support.
>
> Regards,
> Michael
>
> On Thu, Oct 22, 2015 at 8:02 PM, Sumit Kumar via USRP-users <
> usrp-users at lists.ettus.com> wrote:
>
>> I purchased this Octoclock-G nearly 1.5 yrs back. At that time ethernet
>> support was not there. Now it seems to be there. What is required to do the
>> same.
>>
>> Googling resulted in this ->
>> http://files.ettus.com/manual/page_octoclock.html
>>
>> So in order to get Octoclock-G connected to my network I have to follow
>> the link above ?
>>
>> Also isn't Octoclock-G plug and ply device. I mean even without
>> networking it will work right ?
>>
>> --
>> Sumit kumar
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20151024/3eda6cb6/attachment-0002.html>


More information about the USRP-users mailing list