[USRP-users] USRP X310 Firmware update

Marcus D. Leech mleech at ripnet.com
Fri Oct 23 19:44:10 EDT 2015


On 10/23/2015 07:10 PM, Mostafa Hefnawi Gmail via USRP-users wrote:
> Dear all;
>
> I am trying to check the radio connection of USRP X310 using findsdru under Matlab and I was asked to update radio
> firmware to version '003.007.003-vendor’. I did, but I am still getting the same warning.
> I am using Windows 7 with uhd_003.009.001-release_Win64_VS2013.
> I have tried to load uhd-images_003.009.001-release and uhd-images_003.007.003-release but still getting the same warning below.
> Thank you for your help.
>
> ___________________________
> Checking radio connections...
> Warning: The firmware build for the USRP radio at '192.168.40.2' is not compatible with the host code build. Update the USRP radio
> firmware to version '003.007.003-vendor'. Refer to Troubleshooting section of Getting Started document for instructions.
>> In warning at 7
>    In reportSDRuStatus at 41
>    In findsdru at 174
>
> ans =
>
>       Platform: 'X310'
>      IPAddress: '192.168.40.2'
>      SerialNum: 'F4A0C3'
>         Status: 'Not compatible'
>
I believe that MatLab bundles its own UHD version--it DOES NOT use the 
same version that you may have installed for other purposes on
   the system 3.7.3 is *very old*, and may not even have X310 support in 
it at all.

Hopefully one or more of the MatLab support people who monitor this list 
can help.






More information about the USRP-users mailing list