[USRP-users] E100 + GnuRadio

Marcus D. Leech mleech at ripnet.com
Wed Oct 21 10:26:10 EDT 2015


On 10/21/2015 07:49 AM, Vidak Kazic via USRP-users wrote:
>
> Hello,
>
> I have created a simple FIR filter module in Gnuradio companion, i.e. 
> the interface. I’ve exported the module to a Python script, fir.py. 
> Now, I’d like to load the script onto my E100, and map one RF input to 
> the source in the FIR module, and the other as sink. If I do this, am 
> I right to assume that I will have an active FIR filter?
>
> So far I found the IP address of the device through a USB connection 
> and ifconfig, and then used: $ ssh root at 10.41.78.208 
> <mailto:root at 10.41.78.208> (the ip address) to make  a connection to 
> the device. Now I’m not sure how to use this connection to communicate 
> with my device, and my script is giving errors of “No device found”. 
> How can I write the FIR module from gnuradio to my E100 device?
>
> Thanks in advance,
>
> Vidak
>
>
If by "module" you just mean a flow-graph, then you can copy the 
generated (you used GRC?) python file over to your E100, using
   the SSH copy command, "scp":

scp <your-python-file>  root at 10.41.78.208:

Then you can ssh to the E100, and run the python file.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20151021/5eec2b4c/attachment-0002.html>


More information about the USRP-users mailing list