[USRP-users] 512 DDR3 SDRAM on E310
jeremy.kelly at echoridgenet.com
Tue Oct 20 14:29:05 EDT 2015
I'm trying to use the SDRAM attached to the FPGA on the E310. Has anyone
tried to do this?
I think I narrowed the part number down to Micron MT41K256M16HA-125 IT. I
tried the Xilinx Memory Interface Generator to make the interface. I used
the schematic to place the pins. Upon validation, however, I get the error
ERROR : The port ddr3_addr is allocated in the bank 33 where the input
ports are allocated. Enable the Internal Vref to use the Vref as GPIO.
What do I do here?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the USRP-users