[USRP-users] What is the battery pack voltage for E310, E312 and is required firmware update already available?
usrp-users-list at olifantasia.com
Fri Oct 2 04:18:55 EDT 2015
Thanks for the info.
The url you gave does not exist or is not publicly accessible.
But the following is accesible:
The README says:
> In order to program the device with the firmware type:
> $ make install
> Note: The Makefile will have to be modified depending on which
programmer you use. Known good programmers include 'Atmel AVR Dragon,
Atmel JTAGICEIII, Atmel AtmelICE'.
Does this mean you can only install this firmware with a programmer,
through jtag ?
Or is there another way?
On 01-10-15 19:59, Moritz Fischer wrote:
> On Thu, Oct 1, 2015 at 10:51 AM, Martin via USRP-users
> <usrp-users at lists.ettus.com> wrote:
>> I read on the USRP E310 manual page that E312 and E310 supports a battery
>> pack (with updated firmware).
>> Which voltage does the battery for E310 need to be ?
>> 3.7 V, 7.4 V or something else?
>> Is the required firmware update already available?
>> The manual names 749801-01 as battery pack, but it is not yet on any ettus
>> webpage. WHat will be the voltage and capacity of this batterypack?
>> Battery notes
>> The USRP E312 (and with upgraded firmware E310) supports LiIon Battery packs
>> (e.g. AA Portable Power Corp, 749801-01).
>> The connector J1 on E312's motherboard is a Molex 53014-6310. The
>> corresponding mating connector is a Molex 51004-0300.
>> Thanks and with best regards,
>> Martin Dudok van Heel
>> USRP-users mailing list
>> USRP-users at lists.ettus.com
More information about the USRP-users