[USRP-users] Where to find the existing FPGA code bas

Martin Braun martin.braun at ettus.com
Fri Jul 31 12:53:05 EDT 2015


Ian has it all covered, but for future reference we do have a manual
page for this: http://files.ettus.com/manual/md_fpga.html

-- M

On 31.07.2015 09:45, Ian Buckley via USRP-users wrote:
> Awantha,
> In this case you will find the top level files and the build directory
> for N200 at fpga-src/usrp2/top/N2x0
> 
> You will also need to use an old version of ISE, any of the 12.x
> versions…I use 12.1
> 
> There are 2 possible build targets depending on which version of N200
> you have, either "make N210R3" or "make N210R4"
> 
> -Ian
> 
> On Jul 31, 2015, at 9:19 AM, Awantha Jayasiri <awantha at ieee.org
> <mailto:awantha at ieee.org>> wrote:
> 
>> HI Thanks very much for the all valuable replies. The one I am using
>> is USRP N200. I was managed to install the USRP-src. I have the Xilinx
>> ICE new (free) version. Should I open the source files on Xilinx ICE
>> or Vivado?
>> Thanks and any reply is highly appreciated.
>>
>> With regards,
>> Awantha 
>>
>> ------------------------------------------------------------------------
>> *From:* Ian Buckley via USRP-users <usrp-users at lists.ettus.com
>> <mailto:usrp-users at lists.ettus.com>>
>> *To:* Jason Matusiak <jason at gardettoengineering.com
>> <mailto:jason at gardettoengineering.com>>
>> *Cc:* Ettus Mail List <usrp-users at lists.ettus.com
>> <mailto:usrp-users at lists.ettus.com>>
>> *Sent:* Friday, July 31, 2015 1:43 PM
>> *Subject:* Re: [USRP-users] Where to find the existing FPGA code bas
>>
>> These are *not* the instructions for mainstream FPGA development or
>> modification of the existing USRP FPGA.
>> These instructions are specific to RFNoC development which is only
>> available on 2 products.
>>
>> If the original poster can identify which USRP he's working with then
>> I'll point you at the exact directories for your product.
>>
>> On Jul 31, 2015, at 6:15 AM, Jason Matusiak via USRP-users
>> <usrp-users at lists.ettus.com <mailto:usrp-users at lists.ettus.com>> wrote:
>>
>> >> HiI am trying to do some modifications to existing FPGA codebase
>> and burn it to the FPGA. I am just wondering
>> >> where I the code base is located in the UHD installation. I am
>> using ubuntu and still cant locate the FPGA
>> >> source files in the computer.Thanks
>> >
>> > The main directions are here:
>> > https://github.com/EttusResearch/uhd/wiki/RFNoC:-Getting-Started
>> >
>> > Basically you need to checkout the right UHD branch (rfnoc-devel), and
>> > then you can work on the FPGA code from within there.  Vivado is the
>> > supported tool, and right now it need to be version 2014.4 only I
>> > believe.
>> >
>> > _______________________________________________
>> > USRP-users mailing list
>> > USRP-users at lists.ettus.com <mailto:USRP-users at lists.ettus.com>
>> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
>>
>>
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com <mailto:USRP-users at lists.ettus.com>
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
>>
> 
> 
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> 





More information about the USRP-users mailing list