[USRP-users] b200 failure to enumerate on USB3 after firmware updateon clean Ubuntu 14.04 VMWare install

Ralph A. Schmid, dk5ras ralph at schmid.xxx
Tue Jul 28 04:59:41 EDT 2015


Hi,

I have this problem on my office PC, while the same VMWare image works
flawlessly on my tablet PC. Up to now I could not find a solution and blame
the hardware or the VMWare support for the hardware. What a BS :-( 

Ralph.


> -----Original Message-----
> From: USRP-users [mailto:usrp-users-bounces at lists.ettus.com] On Behalf Of
> Thomas Taranowski via USRP-users
> Sent: Saturday, July 25, 2015 8:06 AM
> To: usrp-users at lists.ettus.com
> Subject: [USRP-users] b200 failure to enumerate on USB3 after firmware
> updateon clean Ubuntu 14.04 VMWare install
> 
> So I have this b200 and an Ubuntu 14.04 LTS VMWare VM running on
> Windows 8.1  host. When running on a USB3 port, programs such as
> uhd_find_devices will load the firmware image, after which they fail to
> enumerate again until I physically reset them.  Running UHD natively on
the
> Windows host or connecting to a USB2 from the VM port works fine.
> 
> Sample output:
> $ uhd_find_devices
> linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.009.git-217-g012381d9
> 
> -- Loading firmware image:
> /home/trt/src/target/share/uhd/images/usrp_b200_fw.hex... done No UHD
> Devices Found
> 
> Any ideas?
> Thanks!
> 
> 
> 
> Thomas Taranowski | (650)-465-8535 | skype: thomas.taranowski |
> baringforge.com
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com





More information about the USRP-users mailing list