[USRP-users] The FPGA build is not compatible with the host code build.

Jonathon Pendlum jonathon.pendlum at ettus.com
Mon Jul 20 15:27:30 EDT 2015


Hi,

Can you run uhd_find_devices and post the console output? Thanks.



Jonathon

On Fri, Jul 17, 2015 at 8:29 AM, Hildur Ólafsdóttir <
usrp-users at lists.ettus.com> wrote:

> Hi,
>
> I want to change the fpga code of the usrp n210r4. I first tried compiling
> the image of the  unchanged version and uploading, which works. However,
> when I try to run something using gnu-radio I get the following error:
>
> Please update the firmware and FPGA images for your device.
> See the application notes for USRP2/N-Series for instructions.
> Expected FPGA compatibility number 10, but got 11:
> The FPGA build is not compatible with the host code build.
>
> I also compiled and installed the host code from the same git repository
>  but I still get the same error.
>
> I followed these instructions:
> http://files.ettus.com/manual/page_build_guide.html
>
> Any help would be appreciated,
> Hildur
>
>
> _______________________________________________
> USRP-users mailing list
> USRP-users at lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150720/ec0216de/attachment-0002.html>


More information about the USRP-users mailing list