[USRP-users] b210 fpga source makefile trouble

Justin Tallon . tallonj at tcd.ie
Wed Jul 15 12:55:33 EDT 2015


Hey!

I am trying to bui;d the b210 fpga .bin file from source by using the
makefile to generate a .xise project file.

I have followed the instructions in the README file in the fpga-src folder
ie
## Build Instructions (Xilinx ISE only)

- Download and install [Xilinx ISE 14.7](
http://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/design-tools/v2012_4---14_7.html
)
  + You may need to acquire an implementation license to build some USRP
designs.
    Please check the Xilinx Requirements document above for the FPGA
technology used by your USRP device.

- To add xtclsh to the PATH and to setup up the Xilinx build environment run
  + `source <install_dir>/Xilinx/14.7/ISE_DS/settings64.sh` (64-bit
platform)
  + `source <install_dir>/Xilinx/14.7/ISE_DS/settings32.sh` (32-bit
platform)

- Navigate to `usrp3/top/{project}` where cproject is:
  + b200: For USRP B200 and USRP B210

- To build a binary configuration bitstream run `make <target>`
  where the target is specific to each product. To get a list of supported
targets run
  `make help`.

- The build output will be specific to the product and will be located in
the
  `usrp3/top/{project}/build` directory. Run `make help` for more
information.


however, when I execute
$ make B210 PROJECT_ONLY=1

it seems to execute sucessfully, outputting the following:
ISE Version:
make -f Makefile.b200.inc proj NAME=B210 DEVICE=XC6SLX150
EXTRA_DEFS="B210=1"
make[1]: Entering directory
`/home/nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/b200'
build-B210//b200.xise
xtclsh
/home/nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/tcl/ise_helper.tcl
""
make[1]: Leaving directory
`/home/nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/b200'
Generated
/home/nodeuser/data/alt_iris/uhd_fpga/uhd/fpga-src/usrp3/top/b200/build-B210/b200.xise

Project Generation DONE ... B210


but the directory ../top/B200/build_b210/ does not actually appear and
cannot be found anywhere on the system, even thought the output says it
have been created


Any thoughts?
Thanks!
Justin.


-- 
__________________________________________
Regards,
Justin Tallon
CTVR / The Telecommunications Research Centre
Dunlop Oriel House
Trinity College
Dublin 2

*t: +353 1 896 4243m:+353 860670753*
*http://www.ctvr.ie/ <http://www.ctvr.ie/>*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150715/10d342b8/attachment-0002.html>


More information about the USRP-users mailing list