[USRP-users] fpga build win7

Lisa-Marie Faller lisa-marie.faller at aau.at
Fri Jul 10 04:09:34 EDT 2015


Hi,

attached is now a screenshot of the output and build.log after a second 
try of 'make ...'.

Lisa

On 2015-07-09 18:32, Ian Buckley wrote:
> Lisa,
> Specific to your current problem with building the FPGA. Can you 
> please include the part of the log file related to the error you see 
> please. It's pretty much impossible to help without that information.
>
> -Ian
>
> On Jul 8, 2015, at 10:19 PM, "Faller, Lisa-Marie via USRP-users" 
> <usrp-users at lists.ettus.com <mailto:usrp-users at lists.ettus.com>> wrote:
>
>> Hi,
>> By now I managed to build FPGA-master under Ubuntu using Vivado2014.4 
>> (I re-installed Vivado System Design Edition since I understood that 
>> the target FPGA -device must be missing).
>> According to the build under Win7/MinGW: I tried to build the 
>> FPGA-maint with ISE 14.7 and managed to setup the PATH accordingly, 
>> everything seems to work until x300.v is added as source: it says the 
>> x300.v file cannot be found although it is definitely there, any idea 
>> on that?
>> What I want to do finally is ‘abuse’ the USRP-devices (x310) to build 
>> a measurement system. To do that, it will be necessary to reduce the 
>> code on the FPGA. We want to read baseband signals (up to ~10MHz) 
>> from ADCs followed by IQ-demodulation and filtering. On the transmit 
>> side we want to generate these carrier signals (so up to ~10MHz). 
>> This should be done synchronously for 4 of the x310 devices (at the 
>> end). The FPGA-generated carrier signals to be output at the Tx will 
>> be used internally for demodulation.
>> Do you maybe have suggestions on how to go for that concerning FPGA 
>> programming?
>> Thank you and best regards,
>> Lisa
>> *Von:*Neel Pandeya [mailto:neel.pandeya at ettus.com]
>> *Gesendet:*07 July 2015 20:17
>> *An:*Faller, Lisa-Marie
>> *Cc:*usrp-users
>> *Betreff:*[USRP-users] fpga build win7
>>
>> Sorry, there was a typo, I meant to say that we have preliminary 
>> Vivado support in the*master*branch.
>>
>> --Neel
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users at lists.ettus.com <mailto:USRP-users at lists.ettus.com>
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150710/d8c0fa57/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2015-07-10 09:38:35.png
Type: image/png
Size: 38317 bytes
Desc: not available
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150710/d8c0fa57/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build.log
Type: text/x-log
Size: 522 bytes
Desc: not available
URL: <http://lists.ettus.com/pipermail/usrp-users_lists.ettus.com/attachments/20150710/d8c0fa57/attachment.log>


More information about the USRP-users mailing list